Vaccum Chuck is used the compressor to clamp at products.
In the past time vaccum chuck always used pump to work, But our Vaccum Chuck works throught compressor only.

1. without pump
A.this product adops vaccum ejector. only through compressor can work.
B.even machine gad inhaled cooling oil. cooling water or rubbish etc. Vaccum Chuck also can exclude them.
C. Vaccum Chuck had improved many times and machine to simplify. So less breakdown and easy to maintain.
2.for avaiable all process products
A.work well for up layer process. side process. grinding. also easy to drill work.
3.at will to adjust size
A.according to size of process, products to change assemble and adjust machine.
B.according to process products size to place station.
4.place of key trough and workstopper
A.vaccum chuck of bootom install key trogh. so can get exact parallel angle and vertical angle.
B.vaccum chuck of side install two works stoppers, prevent from momentun.
5.following are suitable for clamping process
A.light metal, hard metal, iron board etc.
B.plastic products, ceramics, glass, aluminium, stainless steel, wood, stone materials etc. All in-magnetic products and un-ventilation smooth products.
C.products of small shape, smooth and complicated process.
D.outside of products need full processing but no one can clamp.
E.products of traditional process will cause scar crooked. curved.
F.products of super thin can't clamp.
G.products of smooth but irregular shape.
6.Major assembly machine end using way
A.use semi-automatic fraise process.
B.use fraise or C fralse to process of cover and side.
C.use scuplture machine to make word or precise process.
D.group secondary machine to process.
7.crisis
A.vaccum chuck use vaccum press to clamp products and process. F-=A x P/700 F(kg) A=inhale area(cm²) P(mmHg)
B. Vaccum press and size of area.
C.air suplly should keep steady.
D.Before process products should clean.
E.seal condition and density whether excellent.
F.the clamping area and ventilation.
G.warmth, humidity and curved condition of products.

Parallelism: 0,01mm
Material: S55C
Product: Grounded
Character: airblow circuit to conceal
Plate: Heat Trement
Auxiliary parts: silicone 4Ø2m.

Vaccum Chuck is used the compressor to clamp at products.
In the past time vaccum chuck always used pump to work, But our Vaccum Chuck works throught compressor only.

1. without pump
A.this product adops vaccum ejector. only through compressor can work.
B.even machine gad inhaled cooling oil. cooling water or rubbish etc. Vaccum Chuck also can exclude them.
C. Vaccum Chuck had improved many times and machine to simplify. So less breakdown and easy to maintain.
2.for avaiable all process products
A.work well for up layer process. side process. grinding. also easy to drill work.
3.at will to adjust size
A.according to size of process, products to change assemble and adjust machine.
B.according to process products size to place station.
4.place of key trough and workstopper
A.vaccum chuck of bootom install key trogh. so can get exact parallel angle and vertical angle.
B.vaccum chuck of side install two works stoppers, prevent from momentun.
5.following are suitable for clamping process
A.light metal, hard metal, iron board etc.
B.plastic products, ceramics, glass, aluminium, stainless steel, wood, stone materials etc. All in-magnetic products and un-ventilation smooth products.
C.products of small shape, smooth and complicated process.
D.outside of products need full processing but no one can clamp.
E.products of traditional process will cause scar crooked. curved.
F.products of super thin can't clamp.
G.products of smooth but irregular shape.
6.Major assembly machine end using way
A.use semi-automatic fraise process.
B.use fraise or C fralse to process of cover and side.
C.use scuplture machine to make word or precise process.
D.group secondary machine to process.
7.crisis
A.vaccum chuck use vaccum press to clamp products and process. F-=A x P/700 F(kg) A=inhale area(cm²) P(mmHg)
B. Vaccum press and size of area.
C.air suplly should keep steady.
D.Before process products should clean.
E.seal condition and density whether excellent.
F.the clamping area and ventilation.
G.warmth, humidity and curved condition of products.

Parallelism: 0,01mm
Material: S55C
Product: Grounded
Character: airblow circuit to conceal
Plate: Heat Trement
Auxiliary parts: silicone 4Ø2m.